Solutions
Horse Construction offers full range of structural strengthening materials with technical supports, documentation supports, products supports, project supports.
The flexural and shear bearing capacity of concrete beams strengthened with CFRP is significantly improved. CFRP can effectively inhibit the development of cracks, and make the width and spacing of cracks smaller.
In the late 1980s, based on the idea of bonded steel reinforcement, fiber reinforced plastic (FRP) was used to reinforce concrete structures. In recent years, it has been gradually popularized and applied at home and abroad, and has been fully industrialized. CFRP reinforcement technology is applicable to reinforcement and repair of various structural types and structural parts. Carbon fiber reinforced plastic (CFRP) reinforcement technology is a new external reinforcement technology widely used in fiber reinforced plastics.
Carbon fiber sheet reinforcement technology
1.1 carbon fiber reinforcement technology principle
Carbon Fiber Reinforced Polymer (CFRP) structure reinforcement technology refers to the use of high-performance adhesive CFRP will be pasted on the surface of building structural components, so that both work together to improve the bearing capacity of components, thus achieving the purpose of strengthening the building.
1.2 carbon fiber reinforcement characteristics
• flexible
• high strength
• high modulus
• easy to install
• long shelf life
• light self weight
• high toughness
• anti high temperature
• environmental-friendly
1.3 material
Carbon fiber reinforced concrete structures are mainly made of carbon fiber and paste materials. Bonding material is an important guarantee for the success of construction.
Failure modes of concrete beams
2.1 detection of beam failure
Carbonation test of concrete, or rebound tester to test the strength of concrete, according to the method specified in the code for conversion of concrete cube compressive strength. The failure mode of beams is shown in Figure 1.
2.2 Reinforcement method
The reinforcement of reinforced concrete beams can be divided into: CFRP:
1) reinforce the RC beam by drawing.
2) reinforce the RC beam by drawing U and CFRP on both sides (see Fig. 2).
3) RC beam wrapped reinforcement;
4) stick and reinforce only on both sides of beams.
Construction technology of carbon fiber reinforced polymer(CFRP)
>>The treatment of concrete surface
>>Primer construction
>>Leveling construction
>>Paste of carbon fiber cloth
>>Curing and conservation
End
The ultimate strength and deformation of CFRP confined concrete are much higher than that of unconfined concrete. The greater the reinforcement rate of CFRP, the greater the degree of improvement. The flexural and shear bearing capacity of concrete beams strengthened with CFRP is significantly improved. CFRP can effectively inhibit the development of cracks, and make the width and spacing of cracks smaller. Compared with the existing reinforcement methods, carbon fiber reinforcement method has a broad prospect of development.
You can find anything here you are in need of, have a trust trying on these products, you will find the big difference after that.
High strength, unidirectional carbon fiber wrap pre-saturated to form a carbon fiber reinforced polymer (CFRP) wrap used to strengthen structural concrete elements.
Good thixotropy carbon fiber leveling adhesive for concrete surface repairing
Good impregnation carbon fiber adhesive for applying carbon fiber reinforced polymer(CFRP) wrap for structural strengthening