Reinforcement of brick columns by steel jacketing

It is possible to increase the bearing capacity of brick columns and greatly improve the lateral resistance of brick columns under the condition that the size of brick columns does not increase much.

Reinforcement of brick columns by steel jacketing



The characteristics of the method of strengthening the brick column by steel jacketing.

It is possible to increase the bearing capacity of brick columns and greatly improve the lateral resistance of brick columns under the condition that the size of brick columns does not increase much.


Reinforcement of brick columns by steel jacketing

General method of reinforcing brick columns with outsourced angle steel

First, remove the brick and the four corners of the painted layer and wash them clean.

Then put a layer of 10mm thick cement mortar on the surface of the brick column.

Then the angle steel will be pasted around the loaded brick column and clamped with clamping tools.

Finally, use the batten plate to connect the angle steel to the whole, remove the fixture and whitewash the cement slurry to protect the angle steel.

Angle steel should be anchored into the foundation and the top should be anchored reliably. The angle steel should not be less than L50*5.


Horse Construction Recommended Products

You can find anything here you are in need of, have a trust trying on these products, you will find the big difference after that.

HM-120 Steel Bonding Adhesive

Two-component epoxy modified epoxy structural strengthening adhesive for bonded steel plate to concrete

See more >

HM-120M Steel Jacketing Adhesive

Modified epoxy resin structural perfusion adhesive, specifically for supporting adhesive bonded steel reinforcement

See more >

HM-120L Crack Injection Resin

Very strong penetration and low viscosity epoxy crack injection adhesive for repairing concrete crack

See more >

Back
Top
Close